| BP (Britannia Pewter) |
350 °C |
7.3g/cm3 |
Non toxic, strong, takes a high polish |
| 92 |
300 °C |
7.3g/cm3 |
Lead free, strong, good detail |
| KP |
280 °C |
7.6g/cm3 |
Softer than 92, good detail, low pouring temp |
| C |
300 °C |
9.3g/cm3 |
Soft alloy, good detail |
| 29 |
320 °C |
10.0g/cm3 |
- |
| 20 |
340 °C |
10.2g/cm3 |
- |
| 18 solder |
145 °C |
- |
Good fluidity, good wetting |
| HAYESOL 70 (Cerrobend) |
68 °C |
- |
Good melting point alloy for fire sprinklers, pipe bending and proof pattern making |
| HAYESOL 11 (BS3332B) |
425 °C |
- |
High load tin base bearing alloy |
| HAYESOL 11 (BS3332B) |
480 °C |
- |
Same as above but with higher fatigue resistance |
| HAYESOL 12 (SAE 11) |
400 °C |
- |
High strength hard tin base bearing alloy |
| HAYESOL 13 (DLM No.8) |
370 °C |
- |
Cost effective lead base bearing alloy |
| HAYESOL 100 |
100 °C |
- |
Cadmium free fusible alloy for X-Ray shielding |
| UWBA (Under Water Bearing Alloy) |
400 °C |
- |
For stern bearings. Alloy is equipotential to iron |
| Antimonial Lead |
- |
- |
Used for boat keels |
| |
- |
- |
- |
